Et-468 Wood edging machine for woodworking

ET-468 Woodworking Machinery wood edging machine for Wood working1) Used for different plate: MDF, block board, particle board, solid wood board, polywood, polymer plate, fire board etc.2) Banding edge for desks,carbinet,wardrobe and stright line furniture.3) Tape material can be PVC,melamine, veneer etc.4) Can save lots of

Featured Products

ET-468 Woodworking Machinery wood edging machine for Wood working

Et-468 Woodworking Machinery Wood Edging Machine for Wood Working
1) Used for different plate: MDF, block board, particle board, solid wood board, polywood, polymer plate, fire board etc.

2) Banding edge for desks,carbinet,wardrobe and stright line furniture.

3) Tape material can be PVC,melamine, veneer etc.

4) Can save lots of labors and cost, especially suitable for suitable for medium and large scale users.

5) Concentrated modern design for automatic woodworking production line.

Et-468 Woodworking Machinery Wood Edging Machine for Wood Working
 
ModelET-468
Edge belt thickness0.4-3mm
Edge belt width12-62mm
Panel thickness10-60mm
Feeding speed12-20 m/min
Heating power2 kw
Pre-heating power350 w
Conveyor belt1.5 kw
Pre-milling power2.2 kw*2
Glue power0.75kw
End trimming0.37kw*2
Rough trimming0.75kw*2
Fine trimming0.75kw*2
Corner tracking 0.5kw*2
Scrapping  
Buffing0.37w*2
Working pressure0.7 Mpa
Total power15 kw
Dimension 5600*1100*1600 mm
Net Weight2800 kg  

Et-468 Woodworking Machinery Wood Edging Machine for Wood Working
1)Gluing and press mechanism adopts glue melting device to gelatinize the plates and tape uniformly, meanwhile make sure they canbe conglutinated firmly.
2)End-trimming mechanism is to cut the forward and rear tape after gluing and press process by the movement of the precise guide track, it is with automatic tracking and high-frequency motor fast cutting structure to ensure the cutting surface smoothly.
3)Rough &Fine Trimming unit, there are two individual high frequency motors, trim the exceeding edge on the top and bottom side of the panel to ensure both sides of the edge smooth and even.
4)Scraping unit for a perfect finishing of the applied edge. Buffing unit is equipped with cotton polishing wheels to make smooth surface by end-polishing.  
Et-468 Woodworking Machinery Wood Edging Machine for Wood WorkingEt-468 Woodworking Machinery Wood Edging Machine for Wood Working
1) Multi-Fuction: Linear edge banding machine with Pre-milling--gluing--end trimming--rough trimming--fine trimming--scrapping--buffing. 

2) Pre-milling is equipped with double trim-blades working on the waved effect in order to revise the plate before the following process.
3) Gluing and press mechanism adopts glue melting device to gelatinize the plates and tape uniformly, meanwhile make sure they can be conglutinated firmly.

4) End-trimming mechanism is to cut the forward and rear tape after gluing and press process by the movement of the precise guide track, it is with automatic tracking and high frequency motor fast cutting structure to ensure the cutting surface smoothly.

5) Rough &Fine Trimming unit, with two individual high frequency motors, trim the exceeding edge on the top and bottom side of the panel, ensure both sides of the edge smooth and even.

6) Slotting unit, it is a optional function, used to slot out grooves on panel to install glass, back panel etc.
7) Scraping unit for a perfect finishing of the applied edge.

8) Buffing unit is equipped with cotton polishing wheels to make smooth surface by end-polishing.
Et-468 Woodworking Machinery Wood Edging Machine for Wood Working

Et-468 Woodworking Machinery Wood Edging Machine for Wood Working
Et-468 Woodworking Machinery Wood Edging Machine for Wood Working
Et-468 Woodworking Machinery Wood Edging Machine for Wood Working

1) Factory direct, with more than 17 years woodworking machinery production experience.
2) Can do OEM/ODM according to your request.
3) Engineer is available to help commissioning overseas.
4) Within 24 hours response if any enquiry and quick after-sales service system.
5) With own R&D strength .
Et-468 Woodworking Machinery Wood Edging Machine for Wood Working1.Other manufacture:Rough workmanship, no anti-rust treatment.
2.Our machines:With streamline oxidation treatment surface,the machine is attractive and durable.The heating plate is chorme plated instead of wape iron, it can has higher ragidity , higher heating speed, higher guiding precision, can work on -30 degree tempreture.Et-468 Woodworking Machinery Wood Edging Machine for Wood Working

Et-468 Woodworking Machinery Wood Edging Machine for Wood Working

1.Q: Are you a manufacturer or trading company?
      A: We are a manufacturer, We are dedicated to pipe processing equipment manufacturing.

2.Q: Where is the nearest airport and port from your factory?
      A: The nearest airport and port is Qingdao.

3.Q: What is the spare parts about the machines?
      A:Pipe bender is seal components and valves.
      B:Pipe cutter is seal components and saw blades.

4.Q: How about the training and installment after we buy your machines?
      A: Our factory can send our engineer to the customer's factory install,commission and training freely. The customer provide the  double trip tickets,food and accommodation for our engineer. The customer also can send the engineer to our factory to learn the operation and maintains freely.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours